Micro oil screw machine maintenance guide

Micro oil screw machine maintenance guide

     Daily maintenance content :

1 Check the air filter and coolant level ;

(2) Check all hoses and fittings for leaks case ;

3 Check the record, if consumable parts replacement cycle has to be shut down to be replaced ;

4 Check the record , when the host exhaust temperature at or near 98 ° C, oil cooler must be cleaned ;

5 Check the record , if found separator pressure reaches 0.6BAR above ( limit 1BAR) or differential pressure began a downward trend should stop changing separation core ;

6 Check the condensate drain , and if found to displacement is too small or no condensate discharge must stop cleaning water separator ;

Back to top

Monthly maintenance content :

1 Check the oil cooler surface , if necessary, be cleaned ;

(2) After cleaning the cooler ;

3 washing water separator ;

4 Check all wires and connections to be fastened ;

5 Check the AC contactor contacts ;

6 Clean the motor housing suction outlet surfaces and dust on the surface ;

7 back to the oil filter cleaning ;

Back to top

Quarterly maintenance content :

A main motor lubrication ;

(2) Clean the main motor and fan motor ;

3 Replace the coolant ;

4 Replace the oil filter ;

5 Clean the oil cooler ;

6 Check the minimum pressure valve ;

7 Check the sensor .

Back to top

Annual maintenance content :

1 Replace coolant (Ultra Coolant)

2 Check the check valve ;

3 Check the cooling fan ;

4 Check the hydraulic cylinder or stepper motors and stepper limit device ;

5 Safety valve calibration ( Bureau of Labor designated units to send mandatory inspection ) .

Back to top

Note:

Maintenance on the air compressor , please carefully read the operating instructions of random